国内精品久久久久影院

  • <span id="bljnw"><output id="bljnw"></output></span><track id="bljnw"><em id="bljnw"></em></track>

  • <acronym id="bljnw"></acronym>

    產品詳情
    所在位置: 首頁> 產品目錄> SCHNORR>
    • 產品名稱:德國K-SPRINGS,“ K”形碟形彈簧

    • 產品型號:中國代理商
    • 產品廠商:SCHNORR
    • 產品價格:0
    • 折扣價格:0
    • 產品文檔:
    你添加了1件商品 查看購物車
    簡單介紹:
    德國K-SPRINGS“ K”形碟形彈簧一個重要優點是其形狀簡單的環。 這樣可以確保它們施加在軸承上的負載均勻地分布在軸承套圈上。 通過以交替方向(單個系列)布置彈簧,可以在恒定負載下提供額外的運動。相反,當彈簧布置成面向相同方向(平行堆疊)時,可以在恒定彈簧撓度下施加附加載荷。
    詳情介紹:

    K-SPRINGS“ K”形碟形彈簧



    “ K”形碟形彈簧的一個重要優點是其形狀簡單的環。 這樣可以確保它們施加在軸承上的負載均勻地分布在軸承套圈上。

     通過以交替方向(單個系列)布置彈簧,可以在恒定負載下提供額外的運動。 

    相反,當彈簧布置成面向相同方向(平行堆疊)時,可以在恒定彈簧撓度下施加附加載荷。                                                                                     

      

    K-Springs碟形彈簧的優點:

    可以適應裝配中建立的公差,而無需改變預緊力。

    可以適應通過差分擴展產生的長度變化。 組件的任何后續軸向移動都不會顯著改變預緊力。

    除了消除原始軸向游隙之外,這些還有其他優點。







    Smooth & Noise-free

    Ball bearings run smoothly and noise-free when pre-loaded with our Original SCHNORR® “K” disc springs. They are available in slotted and non-slotted versions for bearings up to a diameter of 360 mm. Depending on the purpose for which they are used one or more disc springs may be specified.

    Since in particular cases the inner ring rather than the outer ring of the ball bearing should be preloaded, all “K” disc springs are designed such that the outer diameter suitable for one size of bearing will also fit the inner diameter of another size of bearing. For example, a “K” disc spring which is designed for preloading the outer ring of a size 6302 bearing, can also be used to preload the inner ring of a size 6205 or 6305.

    The use of “K” disc springs has important advantages.

    An important advantage of “K” disc springs is their shape of a simple ring. This ensures that the load which they apply to the bearing is distributed evenly around the bearing ring. Additional movement at constant load can be provided by arranging the springs in alternate direction (single series). Conversely, additional load can be applied at constant spring deflection when springs are arranged to face the same direction (parallel stacking).

    As all springs are designed to have a highly regressive characteristic large (ho/t) spring load remains nearly constant for large spring deflection.

    Advantages of K-Springs:

    • The tolerances built up in the assembly can be accommodated without significant change in preload.
    • Length variations through differential expansion can be accommodated. Any subsequent axial movement of the assembly does not alter the preload significantly.
    • These are further advantages in addition to the elimination of original axial play.
    標題:
    內容:
    聯系人:
    聯系電話:
    Email:
    公司名稱:
    聯系地址:
     
     
    注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
    2.如有必要,請您留下您的詳細聯系方式!
    国内精品久久久久影院

  • <span id="bljnw"><output id="bljnw"></output></span><track id="bljnw"><em id="bljnw"></em></track>

  • <acronym id="bljnw"></acronym>